• Short Lead Time for Flexicraft Non-Metallic Joint - Abrasion resistance rubber expansion joints – Lide

    Short Lead Time for Flexicraft Non-Metallic Joint - Abrasion resistance rubber expansion joints – Lide

    Expansion rubber joints are assembled on the piping, which can reduce the vibration, reduce noise, protect pipe system from start-up forces as well as system surges, compensate movements and misalignments from the piping line. The rubber joints are used below systems, but not limited Commercial HVAC systems Industrial piping systems Power plants Sewage treatment plants The material of tube is reinforced natural rubber, which can increase the abrasion resistance, worn-resistance. This rubber m...
  • Factory Free sample Redvalve Rubber Expansion Joint - A-8 ~Standard Flanges – Lide

    Factory Free sample Redvalve Rubber Expansion Joint - A-8 ~Standard Flanges – Lide

    Our available goods The elastomers are assembled with the mating flanges, with different standards and different pressures. Sometimes, buyers need us to buy for them, shipped together with rubber joints. Below is the flange standards which we can supply: 1) ANSI B16.5, ASME B16.47 FLANGE Design: welding neck, slip on, blind, socket welding, threaded, lap-joint Pressure: 150#, 300#, 600#,900#,1500#, Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS Material: ...
  • factory low price Nbr Expansion Rubber Joints - A-1 ~Single Arch Rubber Expansion Joint – Lide

    factory low price Nbr Expansion Rubber Joints - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Our available goods The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressu...
  • Special Price for Rubber Flexible Joint - A-8 ~Standard Flanges – Lide

    Special Price for Rubber Flexible Joint - A-8 ~Standard Flanges – Lide

    Our available goods The elastomers are assembled with the mating flanges, with different standards and different pressures. Sometimes, buyers need us to buy for them, shipped together with rubber joints. Below is the flange standards which we can supply: 1) ANSI B16.5, ASME B16.47 FLANGE Design: welding neck, slip on, blind, socket welding, threaded, lap-joint Pressure: 150#, 300#, 600#,900#,1500#, Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS Material: ...
  • Well-designed Rubber Expansion Joint Standard - A-8 ~Standard Flanges – Lide

    Well-designed Rubber Expansion Joint Standard - A-8 ~Standard Flanges – Lide

    Our available goods The elastomers are assembled with the mating flanges, with different standards and different pressures. Sometimes, buyers need us to buy for them, shipped together with rubber joints. Below is the flange standards which we can supply: 1) ANSI B16.5, ASME B16.47 FLANGE Design: welding neck, slip on, blind, socket welding, threaded, lap-joint Pressure: 150#, 300#, 600#,900#,1500#, Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS Material: ...
  • Lowest Price for Flexible Bellow Expansion Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Lowest Price for Flexible Bellow Expansion Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Our available goods The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressu...
  • 100% Original Factory Mercer Rubber Expansion Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    100% Original Factory Mercer Rubber Expansion Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Our available goods The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressu...
  • Best Price for Rubber Joint - A-5 ~Threaded Union – Lide

    Best Price for Rubber Joint - A-5 ~Threaded Union – Lide

    Our available goods Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 (48) 5.5 (55) Vacuum Kpa (Kgf/Cm2)...
  • Quality Inspection for Hvac And Water Expansion Joint - Abrasion resistance rubber expansion joints – Lide

    Quality Inspection for Hvac And Water Expansion Joint - Abrasion resistance rubber expansion joints – Lide

    Expansion rubber joints are assembled on the piping, which can reduce the vibration, reduce noise, protect pipe system from start-up forces as well as system surges, compensate movements and misalignments from the piping line. The rubber joints are used below systems, but not limited Commercial HVAC systems Industrial piping systems Power plants Sewage treatment plants The material of tube is reinforced natural rubber, which can increase the abrasion resistance, worn-resistance. This rubber m...
  • Discount Price High Pressure Rubber Bellow Manufacturer - A-7 ~Rubber Pipe Connector – Lide

    Discount Price High Pressure Rubber Bellow Manufacturer - A-7 ~Rubber Pipe Connector – Lide

    Our available goods Rubber Pipe is an economical, abrasion-resistant replacement for steel and cast iron pipe, either in straight lengths or where a specified radius is required. B-1 Rubber Pipe may be used in conveying ore, corrosive chemicals, sand,and other abrasive slurries. It is absolutely necessary that rigid metal pipe on both ends of the pipe be properly anchored to eliminate the danger of excessive elongation. If the pipeline is not anchored, control units should be used. Material: ...
  • Big Discount India Made Rubber Expansion Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Big Discount India Made Rubber Expansion Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Our available goods The spool type rubber joint is molded type, with a metal collar reinforced at the neck of the body. The ST stype uses a light reaining ring to support the integral flange. STF is filled arch, with 50% of the ST allowed movements, but it has 4 times spring rates than hollow arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 ...
  • Hot-selling Ansi 150 Rubber Expansion Joints - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Hot-selling Ansi 150 Rubber Expansion Joints - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Our available goods Wide arch system is the molded expansion joint, with integral flange and without a metal reinforcement at the neck of the body. Wide arch allows greater movements and low spring rates comparing to spool type. WA and WAF is used for an economical wide arch rubber expansion joint.  WAF is filled arch, with 50% of the WA allowed movements, but it has 4 times spring rates than wide arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16...
123456 Next > >> Page 1 / 302